EBC 86-89 Mazda RX7 2.4 (1.3 Rotary)(Vented Rear Rotors) Redstuff Front Brake Pads

There are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90-percent. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in ALL OTHER pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.This material is a Synthetic Fiber based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer; it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50-percent dust reduction.Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.
Low dust EBC Redstuff is a superb pad for fast street use and targets high HP imports, muscle cars and prestige European cars. EBC Redstuff ceramic pads reduce dust emitted by OEM pads by approx 80 percent.
DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty
93 thru 96 MAZDA RX7 2.6 Twin Turbo (1.3 Rotary)(Vented Rear Rotors)

Fits
Mazda RX-7 10th Anniversary 1988
Mazda RX-7 Base 1986 to 1987
Mazda RX-7 Base 1991
Mazda RX-7 Base 1993 to 1995
Mazda RX-7 Base 2+2 1987
Mazda RX-7 Convertible 1988 to 1991
Mazda RX-7 GTU 1988 to 1990
Mazda RX-7 GTUs 1989 to 1990
Mazda RX-7 GXL 1986 to 1990
Mazda RX-7 GXL 2+2 1987 to 1990
Mazda RX-7 LX 1987
Mazda RX-7 LX 2+2 1987
Mazda RX-7 R1 1993
Mazda RX-7 R2 1994 to 1995
Mazda RX-7 SE 1988
Mazda RX-7 SE 2+2 1988
Mazda RX-7 Sport 1987
Mazda RX-7 Touring 1993 to 1995
Mazda RX-7 Turbo 1986 to 1991