EBC 03+ Ford Crown Victoria 4.6 Redstuff Rear Brake Pads

There are TWO reasons our customers love Redstuff, First because they are the lowest dust pad we have encountered by reducing dust by 60-90-percent. Plus the minimal dust you see is very easily removed with a simple sponge wash as it contains no steel fibre particles as in ALL OTHER pads. Second they brake like an alligator right from cold (as good as Original pads or better) and just get better as they heat up.This material is a Synthetic Fiber based brake compound enhanced with ceramic particles. If you have previously tried EBC redstuff (pre-ceramic compound) this material is light years ahead. It lasts longer; it brakes better and is quieter. Being a hard wearing pad, bed-in times can be as long as 1000 miles and drivers must be patient until the pad takes up the shape of their disc (brake rotor). This is a truly impressive fast road pad for repeated heavy braking.It emits far less dust than semi-metallic pads and has been proven to stop a passenger car/sedan/sport compact/hot hatch 13 metres quicker than OEM pads from 100mph/160kph. Features EBC Brake-In surface coating which conditions rotor surface and accelerates pad bed-in. Nominal friction coefficient 0.5 with approx. 50-percent dust reduction.Most EBC Red Ceramic pads are approved to ECE R90 brake safety regulation.
Low dust EBC Redstuff is a superb pad for fast street use and targets high HP imports, muscle cars and prestige European cars. EBC Redstuff ceramic pads reduce dust emitted by OEM pads by approx 80 percent.
DO NOT FIT UPGRADE PADS TO REAR OF VEHICLE UNLESS SAME UPGRADE FITTED TO FRONT, The ?Thermic Black coating? does NOT need to be removed before install. Do NOT use brake cleaner or any other method to remove Thermic Black coating from discs rotors. The Thermic black coating will be removed in the pad swept area by the brake pads with in the first 10 to 20 stops made after installation on the vehicle.The ?Thermic Black coating? is an anti corrosion coating for long resistance against rust. Attempting to remove Thermic Black Coating with brake cleaner or any other method is NOT covered under EBC warranty
2003 thru 2011 MERCURY Grand Marquis 4.6

Fits
Ford Crown Victoria Base 2003 to 2008
Ford Crown Victoria Base 2010 to 2011
Ford Crown Victoria Fleet 2006 to 2009
Ford Crown Victoria LWB 2003 to 2009
Ford Crown Victoria LX 2003 to 2011
Ford Crown Victoria LX Sport 2004 to 2006
Ford Crown Victoria Police Interceptor 2003 to 2011
Ford Crown Victoria S 2003 to 2005
Ford Crown Victoria Special Edition 2005
Lincoln Town Car Cartier 2003
Lincoln Town Car Cartier L 2003
Lincoln Town Car Designer Series 2006 to 2007
Lincoln Town Car Executive 2003 to 2010
Lincoln Town Car Executive L 2003 to 2011
Lincoln Town Car Executive Protection Series 2003
Lincoln Town Car Protection Series 2004 to 2006
Lincoln Town Car Signature 2003 to 2007
Lincoln Town Car Signature L 2005 to 2011
Lincoln Town Car Signature Limited 2005 to 2011
Lincoln Town Car Ultimate 2004
Lincoln Town Car Ultimate L 2004
Mercury Grand Marquis GS 2003 to 2008
Mercury Grand Marquis GSL 2005
Mercury Grand Marquis Limited Edition 2005
Mercury Grand Marquis LS 2003 to 2011
Mercury Grand Marquis LSE 2003
Mercury Grand Marquis Ultimate Edition 2005
Mercury Marauder Base 2003 to 2004